NEC XN120

NEC XN120 Header Graphics

System Options

Available XN120 system options to enhance and improve system features.

Doorphone



With the XN120 door phone unit, a visitor can alert a group of telephones that they are at the door, similar to a conventional door bell. While the XN120 door phone unit is not vandal or weather proof, it is still the ideal solution for office suite receptions.
Features:
  • Supports door phones 6
  • Adjustable ring duration
  • Loudspeaker and microphone

Applications Services Card



The XN120 Applications services card has two RJ45 ports for expansion cabinet(s) connection, an RJ45 LAN (10/100 Base-T Ethernet) port for PC programming/LAN connection. It also has an RS232 port for call logging and Compact Flash for configuration save and software upgrades.
Features:
  • RJ45 ports 2
  • RJ45 LAN (10/100 Base-T Ethernet) port
  • RS232 Port

Paging and Door Card



The NEC XN120 paging and door card supports two Doors phones, two Audio input/output ports and two relay contacts (for EXMOH, EXPaging, BGM). Two x 3.5mm Right Angle audio jacks are included for Audio input/output ports.
Features:
  • Supports door phones 2
  • Audio input/output ports 2
  • Relay contacts (for EXMOH, EXPaging, BGM) 2
  • Right Angle audio jacks 2

Mail Lite and Voice Announcement Card



The XN120 Mail Lite and Voice Announcement Card has eight port voice mail, 16 channel auto attendant, 48 recordable queue announcements, DUD/DISA greetings and Park and Page. It also has call forward announcements and fixed user guidance messages.
Features:
  • Voice mail 8 port
  • Auto attendant 16 channels
  • Recordable queue announcements 48
  • DUD/DISA greetings
  • Park and page
  • Call forward announcements
  • Fixed user guidance messages

Mail Lite 15-hour Upgrade



Upgrades the XN120 Mail Lite to 15 hours recording time.
Features:
  • Recording time 15 hours

VoIP Compression Card



NEC's XN120 VoIP compression card is available with four channels G.711, G729a, G.723.1 Codecs. It complies to the H323 protocol and up to two cards can be installed in each OP Box.
Features:
  • Channels 4

VoIP Daughter Card



Optional four channels for the NEC XN120 VoIP Compression Card.
Features:
  • Additional channels 4

Battery Box



The NEC XN120 battery box is required to house the batteries that guard against mains power failure.
Features:
  • Robust battery housing

Pack of Three Batteries



XN120 batteries for the NEC Battery Box, which guards against mains power failure.
Features:
  • Batteries for Battery Box
  • Pack of three

Expansion Card 0x8



The XN120 Expansion card is an 8x Hybrid extension ports card. The card will system phones or analogue telephones, caller ID to analogue telephones and system phones.
Features:
  • Hybrid extensions 8
  • Caller ID (network limitations apply)
  • Accepts XN120 and analogue telephones

Expansion Card 3x8



The XN120 Expansion card has three analogue lines plus eight hybrid extensions. The card has caller ID on lines, a power fail switched and caller ID to analogue telephones and system phones.
Features:
  • Analogue lines 3
  • Hybrid extensions 8
  • Caller ID (network limitations apply)
  • Power fail switched

Expansion Cabinet



The NEC XN120 Expansion cabinet is configured in a 3 8 pattern, with two optional slots for further 3 8 or 0 8 cards. There is a slot for Paging / Door phone card and a connection slot for OP Box (for BRI/VoIP cards)
Features:
  • Configured as 3+8
  • Optional slots 2
  • Slot for Paging / Door phone card
  • Connection slot for OP Box

Op Box for BRI and VoIP



The NEC XN120 Op Box has two slots for BRI cards or VOIP (V2) cards
Features:
  • Slots 2

Basic Rate 2 Port ISDN Card



The NEC XN120 Basic Rate ISDN Card, with two circuits on four channels, will support T or S mode, point-point or point-multipoint and power feed on each circuit.
Features:
  • Supports T and S mode
  • Supports point-multipoint
  • Supports point-point
  • Power feed on each circuit

Basic Rate 4 Port ISDN Card



The NEC XN120 Basic Rate ISDN Card, with four circuits on eight channels, will support T or S mode, point-point or point-multipoint and power feed on each circuit.
Features:
  • Supports T and S mode
  • Supports point-multipoint
  • Supports point-point
  • Power feed on each circuit

© 2009 COM-IT Solutions Ltd All rights reserved
COM-IT Solutions Ltd, 126 Cobham Road, Fetcham, Leatherhead, Surrey, KT22 9JS
Telephone: 0844 257 5000         Fax: 0844 257 5001
Email: info@com-its.com